header
Velda itronic spares
!

Replacement Velda itronic copper anode 05 model

velda_itronic_anode
Ideally replace after every one or two years, simply remove stailess steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)

Replacement Velda itronic copper anode 15 model

velda_itronic_anode
Ideally replace after every one or two years, simply remove stailess steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)

Replacement Velda itronic copper anode 35 model

velda_itronic_anode
Ideally replace after every one or two years, simply remove stailess steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)

Replacement Velda itronic copper anode 75 model

velda_itronic_anode
Ideally replace after every one or two years, simply remove stailess steel cathode by 'pulling off' and unscrew the anode to replace. Note always clean the stainless steel part thoroughly (you can leave in a kettle descaler compound to clean)

Winter stop for velda itronic model 05/15

This allows you to remove the copper anode when not in use, normally in winter. Also saves wear on the copper anode. Simple to fit just screw in place of the anode.

Winter stop for velda itronic model 35/75

This allows you to remove the copper anode when not in use, normally in winter. Also saves wear on the copper anode. Simple to fit just screw in place of the anode.

Velda itronic stainless steel cathode for 05 model

itronic cathode
Original stainless steel replacement for itronic 05 model. Simple to fit just pull off the old and replace with new.

Velda itronic stainless steel cathode for 15 model

itronic cathode
Original stainless steel replacement for itronic 15 model. Simple to fit just pull off the old and replace with new.

Velda itronic stainless steel cathode for 35/75 model

itronic cathode
Original stainless steel replacement for itronic 05 model. Simple to fit just pull off the old and replace with new.

Velda itronic end cap with cable 05/15model

Original replacement for itronic 05/15 model. Simple to fit just pull off the old and replace with new.

Velda itronic end cap with cable 35/75model

Original replacement for itronic 05/15 model. Simple to fit just pull off the old and replace with new.

Velda itronic hosetail set 126704 for 35-75 models

Complete set of hosetails for velda itronic models 35 - 75, fits hose sizes, 3/4, 1", 1-1/4" and 1-1/2". complete with rubber seals and outer rings.